The LORENZ DEEPMAX X5/X6 series detectors are the most sensitive and stable metal detecting devices of its kind presently available. They were developed for professional search and locating applications, that's why this metal detectors are often recognised as representing some of the highest quality and newest developments in professional metal detecting equipment.

Some advantages of this detectors: 
• highly sensitive to all kinds of metal 
• stable operation on mineralised ground or salt water 
• reliable / simple operation 
• very easy and effective detection of large areas 
• rugged, refined mechanical construction 
• automatic adaptation of different coil sizes to the electronics 
• small unwanted metal objects can either be identified or eliminated 
• single or dual induction balanced or differential coil designs 
• ferrous / non-ferrous identification* 
• using of computer searching systems with LC Display 
• delay settings for cancelling out the indicating of small metal objects 
• ground settings for balancing the signals from magnetic surface 
• Multi sensor detection**. 
• built-in data logger and additional Hard- and Software**. 

* This function works only with induction balanced coils or DD coils. 
** This functions are available with DeepMAX X6.

The LORENZ DEEPMAX X5/X6 series detectors are updated models of LORENZ DEEPMAX X3metal detector in the field of Pulse GBS metal detectors. The LORENZ DEEPMAX X5/X6 is the result of many years of research and development and especially in the new improved metal classifications and automatic ground balancing facilities. Quality electronics and very special designed electronic - circuitry produce benefits in terms of easy of use as well as sensitivity.

The LORENZ DEEPMAX X5/X6 is a detector designed to be used with both, small or large coils. Large coils offer extreme depth capabilities for big metal objects because of the strong and deep going magnetic field produced. Small coils are preferably used while searching for small objects like single coins or gold nuggets.

The Pulse GBS (Pulse Ground Balancing System) is specialy suitable for searching at depth. The performance of this electronic device is almost unaffected by salt water, most types of mineralised grounds or temperature changes. Specially designed electronics cancel out signals from the ground. The LORENZ DEEPMAX X5/X6 is therefore a reliable tool to locate metal objects at great depths even under the worst environmental conditions. A new improved circuit design suppresses interference from power lines and a power pulse technique produces very accurate signals to obtain very high detection depths. The detector has also a function of an advanced depth of detecting of non-ferrous objects' and a function of metal objects locating, using two different target identifications.

The Pulse GBS works very good because of time delay reading between receiving and tramsmitting phases. High transmitting speed is the main advantage which allows to use the detector with very large coils. Therefore the high frequency for ferrous and non-ferrous metals can be achieved.

The LORENZ DEEPMAX X5/X6 was worked out to provide a high quality search with high sensitivity, stable working and simple operation. A very simple operation namely is guaranteed by a specially developed LC Display and a minimum amount of controls.

Time delay reading function gives some information on the probable kind of metal. Three different ranges of metal objects can be set: small non-ferrous, ferrous and big non-ferrous objects. The LORENZ DEEPMAX X5/X6 gives a visual indication of each object on the LC Display. Time delay reading producing a number between 000 and 099 helps to classify metal objects. The target classification circuitry is only in some cases affected by the size of a metal object and therefore identifies small coins as well as large pieces of metal. It is possible to eliminate some unwanted objects like nails and foils or to identify them as being small unwanted objects while searching for bigger and deeper objects.

The LORENZ DEEPMAX X5/X6 also offers a sophisticated and refined ferrous / non- ferrous target analysis which works more stable on difficult soils in conjunction with the 26cm or 35cm double D search coil. The Detector also emits an audible sound by way of either a speaker or headphones. Detection depths achieved (in air tests) are almost the same in many types of soils and therefore considerably higher than those possible with standard pulse induction or sinewave VLF - TR Detectors.

The LORENZ DEEPMAX X5/X6 is designed for world-wide operation; wide range of its fuctions helps to achieve all the aims the customers. Any organization, which needs an accurate detection of metal objects, will take a great advantage of working with LORENZ DEEPMAX X5/X6 (especially in conjunction with GPS and data logger, realized in LORENZ DEEPMAX X6).

For further information about means and methods of working with LORENZ DEEPMAX X5/X6 please refer to the operating manuals.

Specifications of DEEPMAX X5/X6:

Dimensions:
electronics control box: 18 cm x 9.5 cm x 10 cm 
carrying case for LORENZ DEEPMAX X5/X6: 40 cm x 30cm x 22cm 
1m x 1m frame coil (collapsed): 110 cm x 15 cm x 15 cm 
35 cm search coil with extended S-rod: length: 150 cm 
35 cm search coil with collapsed S-rod: length: 120 cm

Electrical data:
Search-frequency with small/large search coils connected: approx. 2000 / 1000 pulses per second 
Audio target response freq. voltage controlled oscillator: 0 - 6000 Hz 
Power source: external 12V / 7,2Ah lead battery 
Usage time: approx. 5 to10 hours depending on temperature and coil connected 
Battery charger: rapid charger with interchangeable AC-plug 100-240 V for world-wide operation 
Recharge time: max. 10 hours on empty battery 
Operating temperature:v - 5° - + 50°C

Weight:
LORENZ DEEPMAX X5/X6 electronics control box: approx. 1100 g 
Shoulder and belt strap with battery pack: approx. 3330 g 
Carrying case with LORENZ DEEPMAX X5/X6 inside: approx. 7000 g 
Telescopic S pole: approx.470 g

*all measurements taken without connecting cable and connector! The coils ranging from 26cm to 45cm diameter need an S- shaped shaft for operation. All search coils are interchangeable, electrostatic insulated (shielded) and waterproof.

Detection depth of DEEPMAX X5/X6

*Detection depth recordered in medium air; Function: DELAY1/*GND2 
X=outside the range of the coil

LORENZ DEEPMAX X5/X6 STANDARD EQUIPMENT:

• Plastic carrying case with foam padding 
• LORENZ DEEPMAX X5/X6 electronics control box (DEEPMAX X6 has a built-in data logger function and GPS-navigation) 
• Adjustable shoulder and belt strap with built-in 12V battery pack 
• Charger with wide range AC-input (100-240V) 
• One detachable AC-plug for rapid charger (Euro, UK, USA, Australia available) 
• Operating manual 
• Stereo headphones with 6,35 mm plug 
• 1m x1m frame coil 
• 35cm double D coil 
• telescopic S- pole with armrest for 35cm DD coil

Special features of DEEPMAX X6: GPS-navigation, data logger, Hard- and Software Surfer and Scripter

- six channel data acquisition, supported by GPS: storage media USB-stick (2.0) 
- number of fields: 99 
- sampling rate: 16 per second 
- resolution 24 bit 
- GPS module with USB storage media: 
• High Sensitivity: -160 dBm 
• DGPS, WAAS, EGNOS and MSAS Support 
• very short TTFF Time To First Fix 
• position accuracy 2,5 m CEP, 5,0 m SEP/SBAS, 2,0 m CEP, 3,0 m SEP

To generate colour, image, surface or contour maps with the LORENZ DEEPMAX X6, additional Hard- and Software is necessary. A very sophisticated data logger function of the DEEPMAX X6 metal detector together with an USB 6 channel data logger will take simultaneously six channels of data when you go over the ground and stores the information into memory when this function is selected.

After recording or collecting field data the Surfer Software easily and accurately transforms the data stored on the USB-Stick into colour, contour, surface, image or vector maps on a computer in minutes. An additional Scripter Software will therefore automatically generate twelve maps with each field. Six are twodimensional and six three-dimensional. The operator can therefore choose between different gridding and mapping methods.

The new Datalogger Hard- and Software developed by Lorenz Detecting Systems is first of all easy- to use, very accurately working and affordable. Only four controls of the DEEPMAX X6 will make data acquisition a pleasure for both beginners and professionals like engineers, geologists, archaeologists, scientists and many more. The users will investigate mainly for waste disposal, meteorites, unexploded ordnance, or lost aircrafts.

No non- sense functions will confuse the operator. Six different maps will be generated simultaneously when covering the ground with multiple tracks. Each scan/ map is different depending on the electronic analysis method and therefore will not only give different sensitivity ranges but can be the key to the probable kind of metal buried in the ground. There is clearly a difference in the signature metal objects and ground conditions will give for example. Areas of disturbances in the scans will directly lead to the different metals or ground signals and therefore can be classified in some ways. The operator therefore can use the different scans to his advantage in order to choose between the targets of most interest only by comparing the different scans/ maps. Three delay channels will produce maps with different sensitivity to small and large metal objects. Two ground channels will enable the operator to generate maps with no ground response but Z dimensions and directions for different decay curves of the eddy currents produced in a metal object. In addition the target classification channel will display the delay of the eddy currents of each signal with a certain intensity to give further information on the probable kind of metal in the ground. No matter how strong the ground is mineralised or how many different metals are located in close proximity, this new device will ensure very good results even with difficult surrounding conditions.

Faults produced by the operator or the environmental conditions like overload signals from nearby metal objects for example will be immediately seen when comparing the six channels. In addition GPS data is also recorded from a supplied GPS module to support the user with a compass function or to find the different fields after recording again.

For the professional users additional Hard- and Software will be available for storing positioning data from GPS and several DEEPMAX X6 detectors.

Although the detector can be used with smaller search heads the data logger function is mainly developed for larger metal objects being at least 6cm x 6cm in size. Therefore frames of 1m x 1m or even bigger should be in use to achieve best results.

Search coils/Accessories

26 cm search coil
	This coil is used for detection of small metal objects like coins. The 26 cm search coil is waterproof and therefore can be used in saltwater for example.  (A telescopic pole with armrest is necessary)
26 cm double D search coil
	This coil is used for detection of small metal objects like coins. This coil makes FERROUS / NON-FERROUS indicators on the display of a detector possible.  (A telescopic pole with armrest is necessary)
35 cm search coil
	This highly sensitive search coil has got very good depth capabilities on single coins and medium sized objects.  (A telescopic pole with armrest is necessary)
35 cm double D search coil
	Separate transmitting and receiving windings offer more stable operation on soils with changing contents of iron oxides (minerals) in some cases. Pinpointing small metal pieces is easy with this coil, which can be used for most search applications. This coil makes FERROUS / NON-FERROUS indicators on the display possible.  (A telescopic pole with armrest is necessary)
45 cm search coil
	This search coil can be operated by a single person (its weight is about 600 g). It offers extreme depth ranges on either single coins or bigger objects buried deep in the ground. Depth ranges of more than 1 m for a metal object of the size of a soft drink can (0,33 l) make this coil interesting for a lot of different search and locating purposes.  (A telescopic pole with armrest is necessary)
Universal cable coil
	This coil can be fixed on different coils: cable coil 8 m perimeter: 0,67 x 0,67m - 1 x 1m - 1 x 2m - 2 x 2m cable coil 12 m perimeter: 1 x 1m - 1,5 x 1,5m - 3 x 3m. These cable coils can be used with three or four different frame coils. To work with them fix the coil with one, two or three windings to PVC frame with tape for example. Large areas can be detected with such coils during short period of time. Therefore they locate big deep metal objects quickly, cancelling out the detection of small objects near the surface.
1 x 1 m frame coil
	This frame coil was created for quick detection of medium sized and big objects at the extreme depth. It may be operated by two persons with carrying straps. The coil cable is protected inside tubes.  This square frame coil has very simple operation, assembly and the disassembled coil is really easy to transport. During searching process it ignores small nails and single coins automatically.
1m x 1m double frame coil kit
	This specially designed double frame coil kit basicaly consists of two 1m x 1m frame coils mounted on each other at a distance of approximately 55 cm. Because of its ability to cancel out interferences from power lines or radio transmitters it can be used in urban areas where single loop coils will suffer from false signals.
Power
	- An additional battery pack - Battery charger with interchargeable AC-plug 100-240V - Different detachable AC-plugs(Europe/USA/Great Britain/Australia) (Depends on the series)
A telescopic pole with armrest
	This pole is necessary for any of the small search coils (26/35/45 cm)
Adjustable shoulder and belt strap
	For easy transporting of the device and battery pack
Y-Adaptor cable
	Y-Adaptor cable for interference eliminating search coil systems.
Extender
	For frame coils